Print Page | Close Window

Hobbywing v3.1 setup

Printed From:
Category: Electric
Forum Name: Motors Batteries and Chargers
Forum Discription: The power bit.
Printed Date: 19 October 2019 at 1:45am
Software Version: Web Wiz Forums 10.01 -

Topic: Hobbywing v3.1 setup
Posted By: mutley001
Subject: Hobbywing v3.1 setup
Date Posted: 19 July 2013 at 9:07pm
Anyone got a good setup for 10.5 and 13.5 boosted for TC racing indoors on carpet - just switched to this esc from Tekin - very smooth but I think I could be faster!

Posted By: Graham Kenny
Date Posted: 22 July 2013 at 11:23am
I Have not had much experience with the V3.1 as I got it at the end of last years indoors. But from memory I ran it with standard settings, with 
Boost 50
RPM 4000-12000
Turbo 14
21deg engage/18 disengage. 

I think that was it. 

Our track is quite small, so was geared around 8.5-9 with a Thunder power 10.5 timing at 25. 

Posted By: mutley001
Date Posted: 22 July 2013 at 12:48pm
Brilliant - thanks!
I think I had too much timing on the motor and not enough on the esc.
Roll on next race to try it out!

Posted By: mike123
Date Posted: 11 September 2013 at 7:25am

Posted By: mutley001
Date Posted: 22 September 2013 at 5:28pm
What settings would you change for 13.5 and can you recommend a gearing please Graham?

Posted By: Graham Kenny
Date Posted: 23 September 2013 at 9:01am
Hi Mutley, I have yet to run a 13.5 indoors or out, We have ran Mod outdoors and 10.5 indoors. But this weekend is the first time i will run 13.5 so will know better after then. 

Posted By: mutley001
Date Posted: 23 September 2013 at 7:54pm
Cool - please keep me updated and let me know what you find out

Posted By: Hotrod
Date Posted: 11 February 2015 at 10:27pm

Please can someone send me a set up fot 17.5 blinky, Thanks

Print Page | Close Window

Forum Software by Web Wiz Forums® version 10.01 -
Copyright ©2001-2011 Web Wiz Ltd. -