Print Page | Close Window

Diff Building

Printed From:
Category: Electric
Forum Name: SupaStox GT12 Circuit & Oval
Forum Discription: Discussion on everything SupaStox GT12
Printed Date: 16 January 2019 at 10:49am
Software Version: Web Wiz Forums 10.01 -

Topic: Diff Building
Posted By: Citizen01293
Subject: Diff Building
Date Posted: 05 November 2012 at 1:24pm
Hope someone can help in plain English, I am having to rebuild my diff due to shredding a spur gear I don't have any problems in assembling the Diff but wanted to know if there is a method for ensuring the correct tightness of the diff has been achieved.

any help would be appreciated 

Posted By: Administrator
Date Posted: 06 November 2012 at 9:22am
Personally I keep tightening the diff nut until I can't turn over the spur gear with my thumb when holding both wheels.

Posted By: Citizen01293
Date Posted: 06 November 2012 at 12:50pm
That's route I have been going down but wanted so see if there was a way with more finesse

Posted By: Darren Oakley
Date Posted: 22 December 2012 at 11:40pm
I find doing it as the manual works well for me. Fully tight then one turn back.

Print Page | Close Window

Forum Software by Web Wiz Forums® version 10.01 -
Copyright ©2001-2011 Web Wiz Ltd. -