Print Page | Close Window

Rascal 2

Printed From:
Category: Nitro
Forum Name: Nitro Touring
Forum Discription: Discussion on everything nitro touring
Printed Date: 22 September 2019 at 7:53pm
Software Version: Web Wiz Forums 10.01 -

Topic: Rascal 2
Posted By: jayuk76
Subject: Rascal 2
Date Posted: 27 March 2011 at 3:57pm

Bought a rascal 2 last year and used it a few tmes only to move and had it stored away

Took it out yday and just seem to be having issues

 - starts and then cuts out
 - starts and then when I use the controller to open the throttle just makes a snap noise and cuts out

Any tips on how to get this started and running normally? 

Posted By: big 6 moder
Date Posted: 30 March 2011 at 5:14pm

hi u might need to adjust the small screw on the carb for the fuel-air mixture ..if adjusted wrong the car cuts when u give it gas theres vids on youtube on how to do that just type in tuning rc engines ..or type in your engine and look for tuning vids.

plus could check the plug,crank bearings,piston/sleeve to see if there is damage if the tuning dosent work. the crank bearings in my engine were no good after i left the engine sitting on the self for a few years

and didnt run after run oil on it so it just gumed up and sized the bearings

BIG 6 nitro3E

Print Page | Close Window

Forum Software by Web Wiz Forums® version 10.01 -
Copyright ©2001-2011 Web Wiz Ltd. -